Omron RX2 Series - Page 173

3 - 37
3 Operation
High-function General-purpose Inverter RX2 Series User’s Manual
3-8 Parameter Function
3
3-8-2 Limiting Displayed Parameters
(d) Orientation
Display condition: AA123 = 01 or AA223 = 01
(e) Absolute position control
Display condition: AA123 > 01 or AA223 > 01
(f) Normal acceleration/deceleration speed
Display condition: AC - 02 = 00
(g) Multi-stage acceleration/deceleration
Display condition: AC – 02 = 01
Parameter Name
AE-08 Position bias volume
AE-10 Orientation stop position for input destination selection
AE-11 Orientation stop position
AE-12 Orientation speed setting
AE-13 Orientation direction setting
Parameter Name
AE-20 to 50 Position command 0-15
AE-52 Position range designation (forward rotation)
AE-54 Position range designation (reverse rotation)
AE-56 Positioning mode selection
AE-60 Teaching selection
AE-61 Memorization of current position at power-off
AE-62 Preset position data
AE-64 Gain for calculating the deceleration stop distance
AE-65 Bias for calculating the deceleration stop distance
AE-66 APR control speed limit
AE-67 APR start speed
AE-70 Zero return mode selection
AE-71 Zero return direction selection
AE-72 Low speed zero return speed
AE-73 High speed zero return speed
Parameter Name
AC*15 * 2-stage acceleration/deceleration selection
AC*16 * 2-stage acceleration frequency
AC*17 * 2-stage deceleration frequency
AC*20 * acceleration time 1
AC*22 * deceleration time 1
AC*24 * acceleration time 2
AC*26 * deceleration time 2
Parameter Name
AC-30 Acceleration time for multi-speed 1st speed
AC-32 Deceleration time for multi-speed 1st speed
AC-34 Acceleration time for multi-speed 2nd speed
AC-36 Deceleration time for multi-speed 2nd speed
AC-38 Acceleration time for multi-speed 3rd speed
AC-40 Deceleration time for multi-speed 3rd speed
AC-42 Acceleration time for multi-speed 4th speed