Oracle ZFS Storage Appliance

Configuring SAN iSER Targets
3.
To create an iSER target, on the Configuration > SAN page, click the iSCSI
Targets link.
4.
To add a new iSER target with an alias, click the add icon.
5.
To create a target group, drag the target you just created to the iSCSI Target
Group list.
6.
To create an initiator, click the Initiator link and then click the iSCSI initiators
link.
7.
To add a new initiator, click the add icon.
8.
Enter the Initiator IQN and an alias and click OK. Creating an initiator group is
optional but if you don't create a group, the LUN associated with the target will
be available to all initiators.
9.
To create a group, drag the initiator to the iSCSI Initiator Groups list.
Configuring the Appliance 141