Share and Project Protocols
BUI Name CLI Name Description
the sum of unique space consumed by all snapshots. Blocks
that are referenced by multiple snapshots are not included
in the per-snapshot usage statistics, but will show up in the
share's snapshot data total.
Unused reservation -- If a filesystem has a reservation set, this value indicates
the amount of remaining space that is reserved for
the filesystem. This value is not set for LUNs. The
appliance prevents other shares from consuming this
space, guaranteeing the filesystem enough space. If the
reservation does not include snapshots, then there must
be enough space when taking a snapshot for the entire
snapshot to be overwritten. For more information on
reservations, see “Filesystem Properties” on page 382.
Total space
usage_total
The sum of referenced data, snapshot data, and unused
reservation.
Share and Project Protocols
Each share has protocol-specific properties that define the behavior of different protocols for
that share. These properties can be defined for each share or inherited from a share's project.
For iSCSI, initiators can discover the target through one of the mechanisms described in
“Configuring Storage Area Network (SAN)” on page 128.
For information about supported protocol properties, see the following sections:
■
“NFS Protocol” on page 402
■
“SMB Protocol” on page 409
■
“HTTP Protocol” on page 414
■
“FTP Protocol” on page 414
■
“SFTP Protocol” on page 414
■
“TFTP Protocol” on page 415
Related Topics
■
“NFS Configuration” on page 237
■
“SMB Configuration” on page 243
NFS Protocol
This section contains the following topics:
402 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016
To Next Page
Loading...
Need help?
General