Oracle ZFS Storage Appliance User Manual

Adding TFTP Access to a Share (BUI)
For information on SRP targets and initiators, see “Configuring Storage Area Network
(SAN)” on page 128.
TFTP Configuration
Trivial File Transfer Protocol (TFTP) is a simple protocol to transfer files. TFTP is designed to
be small and easy to implement, therefore, lacks most of the features of a regular FTP. TFTP
only reads and writes files (or mail) from/to a remote server. It cannot list directories, and
currently has no provisions for user authentication..
TABLE 68
TFTP Properties
Property Description
Default Root Directory
The TFTP login location. The default is /export and
points to the top of the shares hierarchy. All users will be
logged into this location after successfully authenticating
with the TFTP service
To use TFTP with a share, see “Adding TFTP Access to a Share (BUI)” on page 280.
Adding TFTP Access to a Share (BUI)
1.
Go to Configuration > Services.
2.
Check that the TFTP service is enabled and online. If not, enable the service.
3.
Go to Shares > Shares and select or add a share.
4.
Go to the Protocols tab, and check that TFTP access is enabled.
5.
(Optional) Set the Share mode access to Read only or Read/Write.
Virus Scan Configuration
The Virus Scan service will scan for viruses at the filesystem level. When a file is accessed
from any protocol, the Virus Scan service will first scan the file, and both deny access and
quarantine the file if a virus is found. Once a file has been scanned with the latest virus
definitions, it is not rescanned until it is next modified. Files accessed by NFS clients that
280 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest