Restoring a LOCAL Key (BUI)
key_unavailable
3.
To list dependents, use the following CLI commands:
hostname:shares (pool-010) encryption local keys> select keyname=1 hostname:shares
(pool-010) encryption local key-002> list
Properties:
cipher = AES
keyname = 1
hostname:shares (pool-010) encryption local key-002> list dependents DEPENDENTS
pool-010/local/default/a hostname:shares (pool-010) encryption local key-002>
Related Topics
■
“Changing a Share Encryption Key (CLI)” on page 574
■
“Backing Up a LOCAL Key (CLI)” on page 575
■
“Restoring a LOCAL Key (CLI)” on page 580
Restoring a LOCAL Key (BUI)
To restore a LOCAL key that was deleted, create a new LOCAL key with the same keyname
and value as the deleted key. You must have first recorded, or backed up, this information
before the key was deleted. The backup procedure is described in “Backing Up a LOCAL Key
(BUI)” on page 574. Although deleting a LOCAL key renders shares inaccessible, the shares
can be made accessible again by recreating the LOCAL key.
For information about restoring keys stored in the OKM keystore, refer to the Oracle Key
Manager documention on the Oracle Technology Network (http://www.oracle.com/
technetwork/indexes/documentation/index.html).
Use the following procedure to restore a backed up LOCAL key.
Note - If the keyname is in use with a different key value for existing shares, change the key
used for those shares before restoring the original LOCAL key. For more information, see
“Changing a Share Encryption Key (BUI)” on page 572.
1.
Retrieve the keyname and value for the LOCAL key from your backup location.
2.
Navigate to Shares > Encryption > Local and click the Add icon.
3.
Enter the same keyname as in the backup.
Data Encryption 579
To Next Page
Need help?
General
