Oracle ZFS Storage Appliance User Manual

Setting User or Group Quotas (CLI)
The user and group quota properties are validated separately from the other properties.
However, you may only see one validation error if an invalid user/group as well as another
invalid property is entered. Correcting one error and applying the changes will show any
remaining error messages.
If you see an error message that an invalid property has been entered, it may be an invalid
user/group, another invalid property on the page, or both. Fixing one invalid property and then
applying the changes will reveal any remaining error messages.
Related Topics
■
“Setting User or Group Quotas” on page 398
Setting User or Group Quotas (CLI)
Quotas can be set for a user or group at the project or filesystem level.
1.
Go to shares, select a project, then select a share, as shown in this example:
hostname:> shares select default select eschrock
2.
Enter users, then list to see the current users.
hostname:shares default/eschrock> users
hostname:shares default/eschrock users> list
USER NAME USAGE QUOTA SOURCE
user-000 root 321K - -
user-001 ahl 9.94K - -
user-002 eschrock 20.0G - -
Note - Any user that is not consuming any space on the filesystem, and does not have any quota
set, does not appear in the list of active users.
3.
Enter select and the name= of the user.
hostname:shares default/eschrock users> select name=eschrock
hostname:shares default/eschrock user-002> get
name = eschrock
unixname = eschrock
unixid = 132651
winname = (unset)
winid = (unset)
usage = 20.0G
360 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest