Oracle ZFS Storage Appliance

Setting Up the Directory Structure to Mount the Shares on the Host
scan/dbname_bkup1’;<br/>
allocate channel ch08 device type disk connect ’sys/welcome@ad01-<br/>
scan/dbname_bkup2’;<br/>
allocate channel ch09 device type disk connect ’sys/welcome@ad01-<br/>
scan/dbname_bkup1’;<br/>
allocate channel ch10 device type disk connect ’sys/welcome@ad01-<br/>
scan/dbname_bkup2’;<br/>
allocate channel ch11 device type disk connect ’sys/welcome@ad01-<br/>
scan/dbname_bkup1’;<br/>
allocate channel ch12 device type disk connect ’sys/welcome@ad01-<br/>
scan/dbname_bkup2’;<br/>
allocate channel ch13 device type disk connect ’sys/welcome@ad01-<br/>
scan/dbname_bkup1’;<br/>
allocate channel ch14 device type disk connect ’sys/welcome@ad01-<br/>
scan/dbname_bkup2’;<br/>
allocate channel ch15 device type disk connect ’sys/welcome@ad01-<br/>
scan/dbname_bkup1’;<br/>
allocate channel ch16 device type disk connect ’sys/welcome@ad01-<br/>
scan/dbname_bkup2’;<br/>
configure snapshot controlfile name to<br/>
’/zfssa/dbname/backup1/snapcf_dbname.f’;<br/>
restore validate database;
}
Configuring Oracle SPARC SuperCluster for
Appliance Backup
Use the following procedures to configure the Oracle SPARC SuperCluster for Appliance
backup.
■
Configuring the Appliance for SuperCluster Backup
■
Setting Up the Directory Structure to Mount the Shares on the Host
■
Updating the /etc/vfstab File
■
Enabling the NFS Client Service
■
Updating oranfstab to Access ZFS Storage Appliance Exports
■
Mounting the Shares on the Host
■
Setting the Ownership of the Mounted Shares
Setting Up the Directory Structure to Mount the Shares on the
Host
Set up mount points for the shares on the host as shown:
640 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016