Oracle ZFS Storage Appliance

Adding an iSCSI Target Group (CLI)
Related Topics
■
Understanding SAN
■
SAN Fibre Channel Configuration
■
SAN iSCSI Configuration
■
SAN iSER Target Configuration
■
SAN SRP Configuration
■
SAN Terminology
Adding an iSCSI Target Group (CLI)
To add an iSCSI target group, use the following CLI commands:
ahi:configuration san iscsi targets groups> create
ahi:configuration san iscsi targets group (uncommitted)> set name=tg0
ahi:configuration san iscsi targets group (uncommitted)>
set targets=iqn.2001-02.com.acme:12345,
iqn.1986-03.com.sun:02:daf0161f-9f5d-e01a-b5c5-e1efa9578416
ahi:configuration san iscsi targets group (uncommitted)> commit
ahi:configuration san iscsi targets groups> list
GROUP NAME
group-000 tg0
|
+-> TARGETS
iqn.2001-02.com.acme:12345
iqn.1986-03.com.sun:02:daf0161f-9f5d-e01a-b5c5-e1efa9578416
Related Topics
■
Understanding SAN
■
SAN Fibre Channel Configuration
■
SAN iSCSI Configuration
■
SAN iSER Target Configuration
■
SAN SRP Configuration
■
SAN Terminology
Adding an iSCSI Initiator Group (CLI)
To add an iSCSI initiator group, use the following CLI commands:
Configuring the Appliance 145