Oracle ZFS Storage Appliance User Manual

Editing a Filesystem or LUN (BUI)
8.
To modify the filesystem or LUN properties, use the set command. Properties are
described in “Project and Share Properties” on page 363.
For example, to disable the NFS protocol for the filesystem named fs-1, enter:
hostname:shares default/fs-1> set sharenfs=off
sharenfs = off (uncommitted)
9.
Enter commit.
hostname:shares default/fs-1> commit
hostname:shares default/fs-1>
Related Topics
■
“Filesystem Properties” on page 382
■
“LUN Properties” on page 390
■
“Inherited Properties” on page 364
■
“Creating an Encrypted Filesystem or LUN (CLI)” on page 571
Editing a Filesystem or LUN (BUI)
To modify properties for an indiviudal filesystem or LUN, use these steps.
1.
Go to Shares > Shares.
2.
Select Filesystems or LUNs.
3.
Hover over the filesystem or LUN and click the edit icon , or double-click the
filesystem or LUN you want to edit.
The general properties are displayed for the filesystem or LUN.
4.
Click the Protocols, Access, Snapshots, or Replication tab.
5.
Modify the filesystem or LUN properties described in “Filesystem
Properties” on page 382 and “LUN Properties” on page 390.
Related Topics
■
“Project and Share Properties” on page 363
Shares and Projects 353

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest