Oracle ZFS Storage Appliance

Creating FC Initiator Groups (CLI)
invalid_tx_word_count = 0
invalid_crc_count = 0
Ports:
PORT WWN ALIAS MANUFACTURER
port-000 wwn.2100001B3281A339 longjaw-1 QLogic Corporation
port-001 wwn.2101001B32A1A339 longjaw-2 QLogic Corporation
port-002 wwn.2100001B3281AC39 thicktail-1 QLogic Corporation
port-003 wwn.2101001B32A1AC39 thicktail-2 QLogic Corporation
port-004 wwn.2100001B3281E339 <none> QLogic Corporation
port-005 wwn.2101001B32A1E339 <none> QLogic Corporation
Related Topics
■
Understanding SAN
■
SAN Fibre Channel Configuration
■
SAN iSCSI Configuration
■
SAN iSER Target Configuration
■
SAN SRP Configuration
■
SAN Terminology
Creating FC Initiator Groups (CLI)
To create FC initiator groups, use the following CLI commands:
dory:configuration san fc initiators> create
dory:configuration san fc initiators (uncommitted)> set name=lefteye
dory:configuration san fc initiators (uncommitted)>
set initiators=wwn.2101001B32A1AC39,wwn.2100001B3281AC39
dory:configuration san fc initiators (uncommitted)> commit
dory:configuration san fc initiators> list
GROUP NAME
group-001 lefteye
|
+-> INITIATORS
wwn.2101001B32A1AC39
wwn.2100001B3281AC39
Related Topics
■
Understanding SAN
■
SAN Fibre Channel Configuration
■
SAN iSCSI Configuration
136 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016