Oracle ZFS Storage Appliance User Manual

Discovering FC Ports (BUI)
must have root permissions to perform this action. Note that in a cluster
configuration, you set ports to Target mode on each server separately.
2.
After setting desired ports to Target, click the Apply button. A confirmation
message will appear notifying you that the appliance will reboot immediately.
Confirm that you want to reboot.
3.
When the appliance boots, the active FC targets appear with the icon and, on
mouse-over, the move icon appears.
Related Topics
■
Understanding SAN
■
SAN Fibre Channel Configuration
■
SAN iSCSI Configuration
■
SAN iSER Target Configuration
■
SAN SRP Configuration
■
SAN Terminology
Discovering FC Ports (BUI)
1.
Click the info icon to view the Discovered Ports dialog where you can
troubleshoot link errors. In the Discovered Ports dialog, click a WWN in the list
to view associated link errors.
130 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest