Oracle ZFS Storage Appliance

Configuring SRP Target (BUI)
ahi:configuration san iscsi initiators groups> create
ahi:configuration san iscsi initiators group (uncommitted)> set name=ig0
ahi:configuration san iscsi initiators group (uncommitted)>
set initiators=iqn.2001-02.com.acme:initiator12345
ahi:configuration san iscsi initiators group (uncommitted)> commit
ahi:configuration san iscsi initiators groups> list
GROUP NAME
group-000 ig0
|
+-> INITIATORS
iqn.2001-02.com.acme:initiator12345
Related Topics
■
Understanding SAN
■
SAN Fibre Channel Configuration
■
SAN iSCSI Configuration
■
SAN iSER Target Configuration
■
SAN SRP Configuration
■
SAN Terminology
Configuring SRP Target (BUI)
This procedure describes the steps for configuring SRP targets.
1.
Connect HCA ports to IB interfaces.
2.
The targets are automatically discovered by the appliance.
3.
To create the target group, go to the Configuration > SAN screen.
4.
Click the Target link and then click SRP targets.
5.
The SRP targets page appears.
6.
To create the target group, use the move icon to drag a target to the Target
Groups list.
7.
Click Apply.
146 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016