Oracle ZFS Storage Appliance

Adding an iSCSI Target with an Auto-generated IQN (CLI)
Adding an iSCSI Target with an Auto-generated
IQN (CLI)
To add an iSCSI target with an auto-generated IQN, use the following CLI
commands:
ahi:configuration san iscsi targets> create
ahi:configuration san iscsi targets target (uncommitted)> set alias="Target 0"
ahi:configuration san iscsi targets target (uncommitted)> set auth=none
ahi:configuration san iscsi targets target (uncommitted)> set interfaces=igb1
ahi:configuration san iscsi targets target (uncommitted)> commit
ahi:configuration san iscsi targets> list
TARGET ALIAS
target-000 Target 0
|
+-> IQN
iqn.1986-03.com.sun:02:daf0161f-9f5d-e01a-b5c5-e1efa9578416
Related Topics
■
Understanding SAN
■
SAN Fibre Channel Configuration
■
SAN iSCSI Configuration
■
SAN iSER Target Configuration
■
SAN SRP Configuration
■
SAN Terminology
Adding an iSCSI Target with a Specific IQN and
RADIUS Authentication (CLI)
To add an iSCSI target with a specific IQN and RADIUS authentication, use the
following CLI commands:
ahi:configuration san iscsi targets> create
ahi:configuration san iscsi targets target (uncommitted)> set alias="Target 1"
ahi:configuration san iscsi targets target (uncommitted)>
set iqn=iqn.2001-02.com.acme:12345
ahi:configuration san iscsi targets target (uncommitted)> set auth=radius
ahi:configuration san iscsi targets target (uncommitted)> set interfaces=igb1
Configuring the Appliance 143