Importing a Replication Stream from the NFS Server (CLI)
nfs_server#
2.
Physically move the NFS server to the target appliance site, or copy the
rr_updates folder to external media and prepare for shipping.
Next Steps
■
“Importing a Replication Stream from the NFS Server (CLI)” on page 491
Importing a Replication Stream from the NFS
Server (CLI)
1.
To import the replication stream from the NFS server, navigate to the empty
package on the target.
target_a:configuration services replication sources> ls
Sources:
source-000 203.80.49.153
PROJECT STATE LAST UPDATE
package-000 <awating import> idle unknown
2.
Select the source node corresponding to the address of your source system.
target_a:configuration services replication sources> select source-000
target_a:configuration services replication source-000> ls
Properties:
name = 203.80.49.153
ip_address = 203.80.49.153:216
asn = 2ea4670f-bc17-cf8f-a420-9211d6edda04
Packages:
PROJECT STATE LAST UPDATE
package-000 <awaiting import> idle unknown
3.
Select the package that is awaiting import.
target_a:configuration services replication source-000> select package-000
target_a:configuration services replication source-000 package-000> ls
Properties:
id = 96366bf2-0b3c-4eec-e85b-e36e1b5bc18c
enabled = true
state = idle
state_description = Idle (awaiting import)
offline = true
import_path =
Remote Replication 491
To Next Page
Loading...
Need help?
General