Oracle ZFS Storage Appliance

Enabling a Service (CLI)
Enabling a Service (CLI)
Use the following procedure to enable a service that is not online.
1.
Go to configuration services.
2.
Select a service, then enter the enable command to enable a service.
hostname:configuration services> nis
hostname:configuration services nis> enable
Related Topics
■
“Disabling a Service (CLI)” on page 228
■
“Setting Service Properties (CLI)” on page 231
■
“List of Available Appliance Services” on page 234
■
“Required Service Ports” on page 236
Disabling a Service (BUI)
Use the following procedure to disable a service that is online.
1.
Go to Configuration > Services.
2.
Click the power icon to take the service offline .
Related Topics
■
“Enabling a Service (BUI)” on page 227
■
“List of Available Appliance Services” on page 234
■
“Required Service Ports” on page 236
Disabling a Service (CLI)
Use the following procedure to disable a service that is online.
1.
Go to configuration services.
228 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016