Oracle ZFS Storage Appliance User Manual

Changing FC Port Modes (CLI)
Changing FC Port Modes (CLI)
To change FC port modes, use the following CLI commands:
dory:configuration san fc targets> set targets="wwn.2101001B32A11639"
targets = wwn.2101001B32A11639 (uncommitted)
dory:configuration san fc targets> commit
Related Topics
■
Understanding SAN
■
SAN Fibre Channel Configuration
■
SAN iSCSI Configuration
■
SAN iSER Target Configuration
■
SAN SRP Configuration
■
SAN Terminology
Discovering FC Ports (CLI)
To discover FC Ports, use the following CLI commands:
dory:configuration san fc targets> show
Properties:
targets = wwn.2100001B32811639,wwn.2101001B32A12239
Targets:
NAME MODE WWN PORT SPEED
target-000 target wwn.2100001B32811639 PCIe 5: Port 1 4 Gbit/s
target-001 initiator wwn.2101001B32A11639 PCIe 5: Port 2 0 Gbit/s
target-002 initiator wwn.2100001B32812239 PCIe 2: Port 1 0 Gbit/s
target-003 target wwn.2101001B32A12239 PCIe 2: Port 2 0 Gbit/s
dory:configuration san fc targets> select target-000
dory:configuration san fc targets target-000> show
Properties:
wwn = wwn.2100001B32811639
port = PCIe 5: Port 1
mode = target
speed = 4 Gbit/s
discovered_ports = 6
link_failure_count = 0
loss_of_sync_count = 0
loss_of_signal_count = 0
protocol_error_count = 0
Configuring the Appliance 135

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest