Oracle ZFS Storage Appliance User Manual

Setting Service Properties (CLI)
Icon Description
Go to the service screen to configure properties and view logs. This button appears when you hover
over a service.
The service is enabled and working normally.
The service is offline or disabled.
The service has a problem and requires operator attention.
Enables or disables the service.
Restarts the service.
Enable/disable not available for this service.
Restarts the currently unavailable service. You must enable the service first).
1.
Go to Configuration > Services.
2.
Double-click a service.
3.
Change the properties and then click APPLY.
To reset properties, click REVERT.
Related Topics
■
“Enabling a Service (BUI)” on page 227
■
“List of Available Appliance Services” on page 234
■
“Required Service Ports” on page 236
Setting Service Properties (CLI)
Use the following procedure to define properties for a service. Property names are similar to
their names in the BUI, but CLI names are usually shorter and sometimes abbreviated.
1.
Go to configuration services.
2.
Select a service and enter show to view the list of properties you can set for that
service, along with their current values.
Appliance Services 231

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest