Oracle ZFS Storage Appliance

Configuring SRP Targets (CLI)
8.
(Optional) To create an initiator and initiator group on the Initiator screen, click
the icon, collect GUID from initiator, assign it a name, and drag it to initiator
group.
9.
To create a LUN and associate it with the SRP target and initiators you created in
the previous steps, go to the Shares screen.
10.
Click the LUN link and then click the LUN icon. Use the Target Group and
Initiator Group menus on the Create LUN dialog to select the SRP groups to
associate with the LUN.
Related Topics
■
Understanding SAN
■
SAN Fibre Channel Configuration
■
SAN iSCSI Configuration
■
SAN iSER Target Configuration
■
SAN SRP Configuration
■
SAN Terminology
Configuring SRP Targets (CLI)
The following example demonstrates how to create an SRP target group named targetSRPgroup
using the CLI configuration san targets srp groups context:
To configure SRP targets, use the following CLI commands:
swallower:configuration san targets srp groups> create
swallower:configuration san targets srp group (uncommitted)> set name=targetSRPgroup
name = targetSRPgroup (uncommitted)
swallower:configuration san targets srp group (uncommitted)>
set targets=eui.0002C903000489A4
targets = eui.0002C903000489A4 (uncommitted)
swallower:configuration san targets srp group (uncommitted)> commit
swallower:configuration san targets srp groups> list
GROUP NAME
group-000 targetSRPgroup
|
+-> TARGETS
eui.0002C903000489A4
Configuring the Appliance 147