Oracle ZFS Storage Appliance User Manual

Adding an Alert Action (CLI)
2.
Select the Category, or pick "All events" for everything.
3.
Either pick All Events, or a Subset of Events. If the subset is selected, customize
the checkbox list to match the desired alerts events.
4.
Use the drop down menu in "Alert actions" to select which alert type.
5.
Enter details for the Alert action. The "TEST" button can be clicked to create a
test alert and execute this alert action (useful for checking if email or SNMP is
configured correctly).
6.
The add icon next to "Alert actions" can be clicked to add multiple alerts actions.
7.
Click "ADD" at the top right.
Related Topics
■
Alert Categories
■
Sending Syslog Messages
■
Executing a Workflow
■
Threshold Alerts
■
Resuming/Suspending Datasets and Worksheets
Adding an Alert Action (CLI)
1.
Enter the configuration alerts actions context, and enter the create command.
2.
Go to the "category" property by entering get category = (unset).
3.
Enter set category=thresholds.
4.
Enter set thresholdid=where [id is the identifier that was automatically created
for the threshold alert.
5.
Enter commit.
6.
Enter list to determine the name, including number, of the new alert action.
Look for a threshold without an assigned action and handler.
Configuring the Appliance 187

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest