Oracle ZFS Storage Appliance

Adding a Disk Shelf to an Existing Storage Pool (BUI)
hostname:configuration storage (pool0) discover>
3.
Enter done.
4.
Enter show.
hostname:configuration storage (pool0)> show
Pools:
POOL OWNER DATA PROFILE LOG PROFILE STATUS ERRORS
-> pool0 hostname mirror log_stripe online 0
pool1 hostname - - exported -
Properties:
pool = pool0
status = online
errors = 0
owner = hostname
profile = mirror
log_profile = log_stripe
cache_profile = cache_stripe
scrub = none requested
5.
Enter set pool= and the name of the pool you want to import.
Note - If you have a single pool, the pool name is not displayed, but it is selected.
hostname:configuration storage select> set pool=pool1
pool = pool1
A message reminds you to verify that storage is correctly attached and functioning.
6.
Enter done.
Related Topics
■
“Unconfiguring a Storage Pool (CLI)” on page 104
■
“Renaming a Storage Pool (CLI)” on page 105
Adding a Disk Shelf to an Existing Storage Pool
(BUI)
Use the following task to add a disk shelf to an existing storage pool.
94 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016