Oracle ZFS Storage Appliance

Setting Service Properties (BUI)
1.
Go to configuration services.
2.
Select the service and enter help.
hostname:configuration services> nis
hostname:configuration services nis> help
Subcommands that are valid in this context:
help [topic] => Get context-sensitive help. If [topic] is specified,
it must be one of "builtins", "commands", "general",
"help", "script" or "properties".
show => Show information pertinent to the current context
commit => Commit current state, including any changes
done => Finish operating on "nis"
enable => Enable the nis service
disable => Disable the nis service
get [prop] => Get value for property [prop]. ("help properties"
for valid properties.) If [prop] is not specified,
returns values for all properties.
set [prop] => Set property [prop] to [value]. ("help properties"
for valid properties.) For properties taking list
values, [value] should be a comma-separated list of
values.
Related Topics
■
“Setting Service Properties (CLI)” on page 231
■
“List of Available Appliance Services” on page 234
■
“Required Service Ports” on page 236
Setting Service Properties (BUI)
The Configuration > Services screens allow you to view and modify the services. The following
table describes the icons and buttons in the services screens.
230 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016