Oracle ZFS Storage Appliance

Configuring SMB Data Service (BUI)
8.
Click the Protocols tab for the project and set the SMB resource name to on.
9.
Enable sharesmb and share-level ACL for the Project.
10.
Click APPLY to activate the configuration.
Configuring SMB Data Service (BUI)
1.
Go to Configuration > Services > SMB and click the power icon to enable the
service.
2.
Set SMB properties and click APPLY to activate the configuration. See “SMB
Service Properties” on page 244.
3.
Click the Autohome tab on the Configuration > Services > SMB screen to set
autohome rules to map SMB clients to home directories as described in “SMB
Autohome” on page 250. Click APPLY to activate the configuration.
4.
Click the Local Groups tab on the Configuration > Services > SMB screen and
use the add item icon to add administrators or backup operator users to local
groups as described in “Adding a User to an SMB Local Group” on page 252. a
Click APPLY to activate the configuration.
FTP Configuration
The FTP (File Transfer Protocol) service allows filesystem access from FTP clients.
Anonymous logins are not allowed, users must authenticate with whichever name service is
configured in Services.
To configure FTP, use the following sections:
■
“Adding FTP Access to a Share (BUI)” on page 262
■
“FTP Properties” on page 263
■
“FTP Logs” on page 264
Adding FTP Access to a Share (BUI)
1.
Go to Configuration > Services.
262 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016