Oracle ZFS Storage Appliance User Manual

Configuring SNMP to Serve Appliance Status (BUI)
Configuring SNMP to Serve Appliance Status (BUI)
1.
Go to Configuration > Services > SNMP.
2.
Set the community name, authorized network and contact string.
3.
(Optional) Set the trap destination to a remote SNMP host, else set this to
127.0.0.1.
4.
Click APPLY to commit the configuration.
5.
Restart the service.
Configuring SNMP to Send Traps (BUI)
1.
Go to Configuration > Services > SNMP.
2.
Set the community name, contact string, and trap destination(s).
3.
(Optional) Set the authorized network to allow SNMP clients, else set this to
127.0.0.1/8.
4.
Click APPLY to commit the configuration.
5.
Restart the service.
6.
You must configure alerts to send the traps you want to receive.
For more information about alerts, see “Configuring Alerts” on page 186.
Related Topics
■
“SNMP Properties” on page 323
SNMP Properties
TABLE 91
SNMP Properties
Property Description
Version Toggles between v1/2c and v3.
Appliance Services 323

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest