Oracle ZFS Storage Appliance User Manual

Configuring SRP Targets (CLI)
FIGURE 13
FC Performance
For operations, one can also breakdown by offset, latency, size and SCSI command, allowing
one to understand not just the what but the how and why of FC operations.
The appliance has been designed to utilize a global set of resources to service LUNs on each
head. It is therefore not generally necessary to restrict queue depths on clients as the FC ports in
the appliance can handle a large number of concurrent requests. Even so, there exists the remote
possibility that these queues can be overrun, resulting in SCSI transport errors. Such queue
overruns are often associated with one or more of the following:
■
Overloaded ports on the front end - too many hosts associated with one FC port and/or too
many LUNs accessed through one FC port
152 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest