27 August 2019
BM3050 v Cover
WARNING:
• Always connect the equipment to a properly grounded power source (wall outlet). Wall outlet should be located near the system and eas-
ily accessible. If in doubt, have the power source checked by a qualied electrician.
• Improper grounding of the equipment can result in electrical shock. Never connect the machine to a power source that lacks a ground
connection terminal. This machine is destined for specic purpose only. Any use going beyond this specic purpose is regarded as
beyond the determination. The manufacturer will not be liable for damages resulting from any use beyond the determination, unallowed
operation, respectively. The user alone bears the risk.
• Do not make arbitrary changes or modications to the machine. The manufacturer will not be liable for modications made at the ma-
chine on your own and damages resulting thereof. EC declaration of conformity and the mark CE will be invalidated, if you make changes
at the machine or at the individual components.
• Do not override or bypass electrical or mechanical interlock devices.
• The machine is to be used only by authorized and instructed persons. The responsibilities on operating the machine have to be strictly
laid down and observed so that there are no unclear competences regarding safety aspects.
• Vent holes serve for air circulation to protect the machine from overheating. Make sure that the holes are not covered.
• Do not expose ngers or other parts of the body to moving, rotating or cutting devices such as for instance between upper and lower
trimmer knives.
• Always locate the equipment on a solid support surface with adequate strength tor the weight of the machine.
General Safety
To Next Page
Loading...
