DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual First release Oct 2020
13
room, select high speed ventilation. Minimum required
thickness is 10 mils wet or 5 mils dry.
7.0 Remove all masking material 30 minutes after
application.
ANNEX 1
1. Check and confirm that dew point and surface temperature are in accordance with the following
criteria, Use the following table to determine dew point.:
Surface temperature > 10°C
Surface temperature > or = to dew point + 3°C
2. Check and confirm that TECTYL temperature is between 10°C and 35°C.