PREVOST X3-45 COMMUTER User Manual

SECTION 18: BODY
DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual First release Oct 2020
43
FIGURE 69: DOOR ADJUSTMENT
30. Discard waste according to applicable
environmental regulations, use dangerous
waste containers.
10.1.7.2 Electrical Power Window
1. Insert 2 seals in the window frame.
2. Apply some #680066 glue at the intersection
of the 2 seals and also sparingly in order to
fix the seal to the window frame.
FIGURE 70: SEAL INTERSECTION
3. Clean window using window cleaner.
4. Insert window into frame.
FIGURE 71: WINDOW INSTALLATION
5. Secure window pane to raising mechanism.
DRIVER’S WINDOW GUTTER
6. If applicable, remove plastic film at the
bottom of driver’s window.
7. Dry fit the gutter on the vehicle and
straighten if necessary.
FIGURE 72: DRY FIT AND STRAIGHTENNIG
8. Remove excess of Sika underneath driver’s
window.
9. Clean bottom of driver’s window using
window cleaner.
10. Apply Sika Aktivator at the bottom of driver’s
window.

PREVOST X3-45 COMMUTER Specifications

General

Engine	Volvo D13
Transmission	Allison B500
Fuel Type	Diesel
Length	45 ft (13.7 m)
Width	102 in (2.6 m)
Horsepower	500 hp
GVWR	54, 000 lbs
Height	141 in