42
DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual First release Oct 2020
FIGURE 65: WINDOW WIPER CORNER
24. Apply some #680066 glue inside finishing
panel groove and fix power window wiper.
Anti-friction side must be on glass side.
FIGURE 66: ANTI-FRICTION SIDE
25. Install rub rail with fixing bolts.
26. Install windshield washer reservoir, new
reflector amber #930212, door lock, handle
and power window connector.
FIGURE 67: COMPONENTS REINSTALLATION
27. Reinstall the door on the vehicles with the
mounting bolts (4).
FIGURE 68: DOOR MOUNTING BOLTS
28. Tighten bolts to a torque value of 50 lbs-pi.
29. Make sure to keep a minimum of 4 mm and
not very much between the door skin and
the side panel.