PREVOST X3-45 COMMUTER User Manual

SECTION 18: BODY
76
DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual First release Oct 2020
SECTION 2
PREPARATION OF SURFACES
A Clean using "anti-silicone" until all clothes come clean.
See SAV00001 section A below.
B
Use the belt sander (grit coarse)
Use a new paper on each vehicle side.
C
Clean using "anti-silicone" until all clothes come clean.
See SAV00001 section A below.
D
Apply – Sika 205
See SAV00001 section B below.
SIDE PANEL PREPARATION
A
Clean using “anti-
silicone” until all clothes come clean.
See SAV00001 section A below.
B
Use the belt sander (grit coarse)
Use a new paper on each vehicle side panel.
C
Clean using “anti-
silicone” until all clothes come clean.
See SAV00001 section A below.
D
Apply – Sika 205
See SAV00001 section B below.
SAV00001 Section A Alcohol or Anti-silicone
1. Apply 2. Dry immediately
3. Allow to dry
Mandatory Minimum time : Wait for product to evaporate
After 2 hours: Start cleaning operation again
Before applying any other
product
If surface seems dusty, greasy or with finger marks, start
cleaning operation again.
CHIX cloth
Blue cloth

PREVOST X3-45 COMMUTER Specifications

General

Engine	Volvo D13
Transmission	Allison B500
Fuel Type	Diesel
Length	45 ft (13.7 m)
Width	102 in (2.6 m)
Horsepower	500 hp
GVWR	54, 000 lbs
Height	141 in