78
DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual First release Oct 2020
SECTION 3
SIDE PANEL INSTALLATION
A
Using a pencil, mark the double-face self-adhesive
tape position onto vehicle side.
B
Apply 1/8 X ½”double-face tape as per marking.
C
Compress tape
D
Remove protective film from double-face self-
adhesive tape center section.
E
Install 1/8 X ½” foam tape onto middle reinforcement
then compress.
F
Apply Sika 252
– Onto vehicle surface
– Cut nozzle as per template
– Use the guide for the application
Bead must be continuous for the whole perimeter.
Section A-A Section B-B Section C-C