DOB 1300-1556 | X3-45 Commuter PA-1648 Maintenance Manual First release Oct 2020
potentiometer has bottomed out in housing.
Reinstall screws (Figure 28) and tighten just
enough to secure potentiometer lightly.
TORQUE: 10-20 lb-in (1.13-2.26 Nm)
5. Reconnect electronic foot pedal assembly's
cable harness to the ECM connector. If
potentiometer calibration is necessary (see
"FUEL PEDAL ADJUSTMENT" in this
section).
CAUTION
Make sure the cable harness is routed
correctly, and securely installed so that it does
not become pinched, stretched, or otherwise
damaged during vehicle operation.
FIGURE 28: ELECTRONIC FOOT PEDAL ASSEMBLY 03035