R&S SMA100B - Page 523

Remote control commands
R&S
®
SMA100B
523User Manual 1178.3834.02 ─ 09
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?
Queries the generated number in the automatic file name.
Return values:
<Number> integer
Range: 0 to 999999
*RST: 0
Example:
SENS:SWE:HCOP:FILE:AUTO:NUMB?
Queries the number in the automatic file name.
Usage: Query only
Manual operation: See "Current Auto Number" on page 283
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix
<Prefix>
Sets the prefix part in the automatic file name.
Parameters:
<Prefix> string
Example:
SENS:SWE:HCOP:FILE:AUTO:PREF 'sensor'
The prefix sensor is used in the automatically generated file
name of the hardcopy file.
Manual operation: See "Prefix, Year, Month, Day, Instrument Name" on page 283
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe
<State>
Activates the usage of the prefix in the automatic file name.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: 1
Example:
SENS:SWE:HCOP:FILE:AUTO:PREF:STAT OFF
Deactivates the usage of the prefix in the automatic file name.
Manual operation: See "Prefix, Year, Month, Day, Instrument Name" on page 283
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR?
Queries the year of the date part in the automatic file name.
Return values:
<Year> integer
Range: 1784 to 8000
*RST: 0
Example:
SENS:SWE:HCOP:FILE:AUTO:YEAR?
Queries the year of the date part in the automatic file name.
Power sensor measurement subsystems