R&S SMA100B - Page 522

Remote control commands
R&S
®
SMA100B
522User Manual 1178.3834.02 ─ 09
Return values:
<Day> integer
Range: 1 to 31
*RST: 1
Example:
SENS:SWE:HCOP:FILE:AUTO:DAY?
Queries the day of the date part in the automatic file name.
Usage: Query only
Manual operation: See "Prefix, Year, Month, Day, Instrument Name" on page 283
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe <State>
Activates the usage of the day in the automatic file name.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: 1
Example:
SENS:SWE:HCOP:FILE:AUTO:DAY:STAT OFF
Deactivates the usage of the day in the automatic file name.
Manual operation: See "Prefix, Year, Month, Day, Instrument Name" on page 283
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh?
Queries the day of the date part in the automatic file name.
Return values:
<Month> integer
Range: 1 to 12
*RST: 1
Example:
SENS:SWE:HCOP:FILE:AUTO:MONT?
Queries the month of the date part in the automatic file name.
Usage: Query only
Manual operation: See "Prefix, Year, Month, Day, Instrument Name" on page 283
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe
<State>
Activates the usage of the month in the automatic file name.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: 1
Example:
SENS:SWE:HCOP:FILE:AUTO:MONT:STAT OFF
Deactivates the usage of the month in the automatic file name.
Manual operation: See "Prefix, Year, Month, Day, Instrument Name" on page 283
Power sensor measurement subsystems