R&S SMA100B - Page 787

Glossary: List of the often used terms and abbreviations
R&S
®
SMA100B
787User Manual 1178.3834.02 ─ 09
Remote device: External device controls the R&S SMA100B in remote operation
mode, see Remote operation.
Synonyms: External controller, client device
Remote operation: Allows you to operate the R&S SMA100B from a remote device
via VNC.
Both the R&S SMA100B and the remote device are connected in a LAN.
Synonym: Remote access
Removable memory: General term describing mass memory that can be unmounted
from the instrument.
See also SD card
RF: Radio frequency
S
SAMBA/SMB: Server message protocol
SD card: Secure digital card is a type of removable memory storage, that can hold
files with user data.
Support of this memory type is optional and requires option R&S SMAB-B85.
Throughout this description, the SD card is referred as a removable memory.
See also System drive.
Serial number: Unique instrument identification, provided on the rear panel of the
instrument and required to build the Computer name.
The serial number are the last 6 digits in the string <stock no.>-<serial
number>, e.g. SMA100B-102030
Smart device: A mobile, cordless device, such as a smartphone or tablet, capable of
Internet browsing.
Synonyms: Smartphone, tablet
System drive: The system drive is a built-in internal memory that holds the operating
system, the firmware, and the stored user data.
Throughout this description, the system drive is referred as an internal memory.
See also SD card and Removable memory
T
Trigger: Internally generated or externally supplied signal which starts signal genera-
tion at a particular point in time
Trigger event: A trigger event is caused by the received trigger signal or executed
manual trigger.
U
UE: User equipment