Santana PS-10 User Manual

4A-8 FRONT DRIVE SHAFT
OIL-SEAL OF DIFFERENTIAL GROUP FLANGE
SUBSTITUTION
1) Disconnect front proppeler shaft (1) from connection to the
differential group.
2) Substitute the oil-seal following the same steps as indicated
for the oil-seal of back differential group (see 4B-7).
3) Fill with oil till the correct level and connect proppeler shaft
fixing screws and nuts tightening them to the specified
tightening torque.
Tightening torque:
• Screws / nuts fixing transmission shaft:
2.8 ÷ 3.5 Kg-m (28 ÷ 35 Nm)
• Nut fixing engaging pinion flange:
11.75 Kg-m (117.5 Nm)
1

Santana PS-10 Specifications

General

Brand	Santana
Model	PS-10
Category	Automobile
Language	English