9-2 BODY SERVICE
FRONTAL AND LATERAL DOORS
DOOR GLASS
Removal
Trim removal
1) Removes:
• Door regulator handle (1).
• Handle case (2).
• Pull handle (3).
• Inside lock knob (4).
• Trim screws (5).
2) Remove interior plastic part from door.
Glass removal
3) Remove screws fixing regulator support plate and fixing guide
to mechanism.
4) Withdraw one of the glass guiding profiles to leave it free.
5) Withdraw glass through the lower part and its guiding
channel.
6) Separate glass from channel.
Instalation
1) Reverse removal procedure noting:
• To fix glass (6) in the lower guiding channel (7), apply
soapy water on the guide, and fit the glass using a plastic
hammer.
4
3
5
1
2
6
7