Santana PS-10 User Manual

MAINTENANCE AND LUBRICATION 0B-25
Servo steering hydraulic oil filter (Item 4.6)
Oil Filter Substitution
1) Unlock tank cap (1).
2) Squeeze filter drive (4), turn it leftwards 45º approximately
and extract filter (2).
3) Choose a new filter and put it into the can ensuring that the
lower hole fits inside the guiding tube (3).
4) Squeeze again filter drive (4) and turn it rightwards till proper
fitting in the tank borders (5).
5) Be sure that the oil level is correct (see OB-26, Item 4.7), fit
cap (1).
4
5
45°
INSTALLATION
45°
4
REMOVAL
3
2
1

Santana PS-10 Specifications

General

Brand	Santana
Model	PS-10
Category	Automobile
Language	English