Santana PS-10 User Manual

ENGINE REPAIR 6A-77
REMOVAL AND INSTALLATION OF
ENGINE ON VEHICLE
Removal and installation of engine
Removal
Place the vehicle in an appropriated pit or hydraulic lifter and
prepair containers to pour the fluid of the different circuits.
2) Disconnect battery.
3) Remove bonnet of engine.
4) Open and put away cap (1) for the filling of refrigerating
circuit.
5) Loose completely emptying cap (8) of water radiator and
remove coolant from the circuit.
6) Disconnect or remove:
• Conector (2) of coolant lever sensor (3).
• Degasifier hoses (6) with its support to engine.
• Hose by-pass of filling (7).
• Screws (4) fixing expanding vase (5) and withdraw tank .
1
3
5
6
2
8
4
7
6

Santana PS-10 Specifications

General

Brand	Santana
Model	PS-10
Category	Automobile
Language	English