Santana PS-10 User Manual

MAINTENANCE AND LUBRICATION 0B-5
Replacement and adjustment
• In order to substitute or adjust the tension the generator
and water pump belts, see 6A-26.
• In order to substitute or adjust the tension of the A/A
compressor belt, see 6A-27.
Timing Belts (Item 1.2)
To substitute the timing belt see 6A-28.
Engine Oil and Filter (Item 1.3)
(Engine oil and oil filter change)
Engine oil change
NOTE:
• This operation must be done with the hot engine and
placed level.
• Before draining engine oil, check engine for oil
leakage.
1) Use an adequate container to collect the used oil.
2) Disassemble the draining plug (1) and let dripping the used oil
about 20 minutes.
3) Clean the plug and its lodging within the carter, allowing for a
new enclosing joint in the cap; do it and tighten to the specified
torque.
Tightaning torque:
3 ÷ 4Kg-m (30 ÷ 40Nm)
1

Santana PS-10 Specifications

General

Brand	Santana
Model	PS-10
Category	Automobile
Language	English