0B-6 MAINTENANCE AND LUBRICATION
4) Fill with the recommended oil through the hole (2) and check
oil level using the dipstick (3).
2
3
Oil type and amount
Recommended oil
NOTE:
If the recommended oil is not the one adequate to the
climate of the country where the vehicle is being
utilized (see viscosities table), use the required SAN-
TANA MOTOR oil.
Engine oil amounts
Viscosity
SAE 10 W/40
Standard
API SJ/CF
Total Amount (Drained motor)
Including filter
Without including filters
7,3 litres
7,0 litres
5,9 litres
5) Put the right oil amount for each case, start engine while in
neutral and check there are not oil losses. After a few
minutes, cut off engine, let the oil become still and check
with the rod gauge (3) that the oil mark is MAX; otherwise,
add oil in small quantities till the amount is the right one.
3
To Next Page
Loading...
Need help?
General