Santana PS-10 User Manual

MAINTENANCE AND LUBRICATION 0B-7
Changing the oil filter
1) Use an appropriate container to dispose the used oil from
the filter.
2) Using special spanner (A) ref. 790972, unlock the oil filter
(4).
3) With an appropriate clean new brush cleanse the area where
the filter contacts the coupling.
CAUTION:
Be sure that no hair rests, no dirt, remains in the
contact area of the filter with the coupling.
4
A
5
4) Unwrap the new filter from its casing, apply engine oil in the
joints (5) and thread it by hand.
5) Using the special spanner (A) ref. 99360091, apply the
appropiate torque to the filter.
Tightening torque for the oil filter:
2,5 Kg-m (25 Nm)
6) Start engine and check that there are not oil leaks.

Santana PS-10 Specifications

General

Brand	Santana
Model	PS-10
Category	Automobile
Language	English