Santana PS-10 User Manual

7D-6 TRANSFER BOX
ON VEHICLE SERVICE
CAUTION:
Disconnect battery before any intervention on the
vehicle, this will avoid any possible accidental short
circuits.
REAR SEAL REPLACEMENT
Removal
1) Drain transfer box oil by removing duccin plug (1).
2) Clean oil off the plug thread.
3) Apply recommended sealant to thread and mount the plug
to the specified torque.
Plug torque when empty:
2,3 Kg-m (23 Nm)
1
4) Unscrew nutss (4) which fix the propeller shaft clamp.
5) Adjust the transmission brake until it blocks using the
parkingbrake (5).
NOTE:
If drum does not block, use the transmission brake
tensing screw.
4
5

Santana PS-10 Specifications

General

Brand	Santana
Model	PS-10
Category	Automobile
Language	English