STEERING GEAR BOX AND LINKAGE 3B-11
POWER STEERING FLUID LEAKAGE
INSPECTION
1) Start engine and turn completely the steering wheel in both
directions to get the maximum hydraulic pressure.
2) Inspect visually if there are any leaks in the hydraulic pump,
the liquid tank, hose connections or power steering gear
box.
CAUTION:
Do not keep the steering wheel turned at the
maximum position for more than 10 seconds.
POWER STEERING HYDRAULIC OIL FILTER
SUBSTITUTION
1) To substitute hydraulic oil filter, see 0B-25.
INSPECTION STEERING FLUID LEVEL
1) To adjust hydraulic oil level, see 0B-26.
To Next Page
Loading...
Need help?
General