MAINTENANCE AND LUBRICATION 0B-21
Visual control and running (Item 3.7)
Inspection
1) Check visually the gear box, transfer box and differential
groups for oil leaks through joints and oil seals.
2) Check there are no liquid leaks in the clutch hydraulic circuit,
principal pump or small auxiliary pump.
3) Check the worthiness of the dust protectors of levers and
transmissions.
Test
1) Test the running of the clutch, gear box and transfer box
with the vehicle standing and on the road.
NOTE:
If you detect any faults during inspection or in the
running test, repair or substitute the faulty piece.
To Next Page
Loading...
Need help?
General