Santana PS-10 User Manual

HEATER AND VENTILATION 1A-7
HEATER VALVE
Removal
1) Remove bolts (1) from the tank.
2) Remove degassing tank without forcing the water hoses.
3) Disconnect opening and closing drive from valve (2).
4) Disconnect water inlet and outlet hoses (3) and (4) from
valve and cover up them.
5) Remove fixing nuts and valve.
Instalation
1) Reverse removal procedures.
2) Refill cooling system with proper coolant referring to Section
0B-8 and check each joint for leakage with motor running.
1
4
2
3

Santana PS-10 Specifications

General

Brand	Santana
Model	PS-10
Category	Automobile
Language	English