Santana PS-10 User Manual

9-6 BODY SERVICE
DOOR INSTALATION
Removal
1) Remove fixing screw (1) of limiter (2) to the body.
2) Hold door using a jack and fitting a piece of wood between
door and jack.
3) Remove screws (3) fixing hinges to door and withdraw door.
Instalation
NOTE:
When replacing the door you should apply a wax
layer inside the new door as anticorrosion treatment
(see 9-27).
1) Reverse removal procedure, noting:
• Apply sealant off component in the door internal wedge,
and put back again the door sealant cover.
1
2
3

Santana PS-10 Specifications

General

Brand	Santana
Model	PS-10
Category	Automobile
Language	English