Santana PS-10 User Manual

9-8 BODY SERVICE
2) Apply soapy water to the glass border, and put it on the
weather strip and assembly the strip lip progressively onto
the glass using an appropriate punch.
3) Once the weather strip lip has been assembled on glass,
press firmly glass onto the weather strip.
Instalation of the expanding strip
4) Take a roll of expanding strip (4), cut one end at right angle
and start assembly on the weather strip beginning now at
the opposite lip to the weather strip joint. To assembly
expanding strip use tool (A) ref. 262771.
5) Once done, cut at right angle the expanding strip leaving 6
mm more and pressing till proper fitting.
A
4

Santana PS-10 Specifications

General

Brand	Santana
Model	PS-10
Category	Automobile
Language	English