STEERING WHEEL, COLUMN AND LOWER SHAFT 3C-5
COMBINATION SWITCH FOR LIGHTS,
WIND-SCREEN WIPERS AND HORN
Removal
1) Disconnect the battery.
2) Remove steering wheel (see 3C-3)
3) Remove upper cover (1) and lower cover (2) of the steering.
4) Disconnect the lights switch and wind screen wiper switch
couplers (3).
5) Remove combination switch unit (4) and the wind wiper
switch set (5).
Installation
1) To assembly combination switch invert the dismantling
sequences, noting the tightening torques and the specified
observations in the complementary tasks.
3
1
2
4
5