Shimadzu GC-2010 Plus User Manual

2 Installation
2.2 Component description
10
GC-2010 Plus
Q Rear
Fig. 2.2.3
WARNING
HIGH VOLTAGE
Danger of electrical shock.
Only qualified service personnel may remove the rear cover.
Ensure that the power distribution board power is off before starting
installation if the power cable will be connected directly to terminals
on the power distribution board.
Ensure that the power supply is properly grounded.
Never put heavy objects on the power cable.
HIGH TEMPERATURE
Hot air is exhausted from the back of the unit. Do not place flammable
items behind the unit. Do not touch the back of the GC near the
exhaust.
HIGH PRESSURE GAS
Frequently check gas flow lines for leaks.
In particular, accumulations of hydrogen gas can cause an explosion.
6
5
14
4
2
1
3
14-6
14-5
14-4
14-3
14-2
14-1
7
8
11
12
13
10
9

Shimadzu GC-2010 Plus Specifications

General

Type	Gas Chromatograph
Model	GC-2010 Plus
Manufacturer	Shimadzu
Maximum Temperature Ramp Rate	120 °C/min
Detector Options	FID, TCD, ECD, FPD, NPD, MS
Electronic Flow Control (EFC)	Yes
Data Sampling Rate	Up to 250 Hz
Column Oven Temperature Range	Ambient +5°C to 450°C
Maximum Oven Heating Rate	120 °C/min
Injection Port	Split/Splitless, PTV
Display	LCD