Siemens SITRANS F - Section 3: HARDWARE INSTALLATION GUIDE; 3.1 PREPARING TO MOUNT THE TRANSDUCERS

Setup
3.4 Inputs and outputs
FST030
Function Manual, 04/2017, A5E35693328-AA
145
Related
Path Setup → Inputs and outputs → Channel 3 - input/output → Status output → Process alarms
(1)
3.4.5.8.5 Process alarms (2)
Description
Selection of alarm items that impact the output. Applicable if Status mode = Alarm item.
For hydrocarbon and gas applications only.
Setting 132 Std. vol. flow above alarm limit; 133 Std. vol. flow above warning limit; 134 Std. vol.
flow below warning limit; 135 Std. vol. flow below alarm limit
Default
None
Related
Path
Setup → Inputs & outputs → Channel 3 - input/output → Status output → Process alarms (2)
3.4.5.8.6 Process alarms (3)
Description
Selection of alarm items that impact the output. Applicable if Status mode = Alarm item.
For hydrocarbon and gas applications only.
Setting
228 Sound velocity above alarm limit; 229 Sound velocity above warning limit; 230 Sound
velocity below warning limit; 231 Sound velocity below alarm limit; 232 Flow velocity above
alarm limit; 233 Flow velocity above warning limit; 234 Flow velocity below warning limit;
235 Flow velocity below alarm limit; 236 Pressure above alarm limit; 237 Pressure above
warning limit; 238 Pressure below warning limit; 239 Pressure below alarm limit; 244 Kin.
viscosity above alarm limit; 245 Kin. viscosity above warning limit; 246 Kin. viscosity below
warning limit; 247 Kin. viscosity below alarm limit
Default
None
Related
Path
Setup → Inputs and outputs → Channel 3 - input/output → Status output → Process alarms
(3)
3.4.5.8.7 Process alarms (4)
Description
Selection of alarm items that impact the output. Applicable if Status mode = Alarm item.
For hydrocarbon and gas applications only.